{"title":"Timbren","description":"","products":[{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstof","title":"Timbren Front Active Off-Road Bumpstops for Tacoma, Tundra, 4Runner \u0026 Land Cruiser","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the front bump stops on 4WD Toyota Tacoma, Tundra, 4Runner, and Land Cruiser models with a progressive cushion.\nIndependent front suspension takes the first hit on every rock, rut, and whoop. When the front end runs out of travel, the factory stop meets it with a jolt you feel through the steering wheel and the seat, and that impact goes straight into the front suspension.\nActive Off-Road Bumpstops change how that moment feels. The suspension settles into the stop and eases back out instead of slamming and kicking, so the front end stays composed and the truck tracks where you point it. Your suspension keeps its full travel; you only feel the difference when you need it most. Timbren recommends running front and rear kits together for the best result on rough terrain.\nInstalls at the factory bump stop location with no drilling. Fits 4WD Toyota Tacoma 2005-2023, Tundra 2000-2026, 4Runner 1990-2024, and FJ Cruiser 2007-2014; Sequoia 2023-2026 (2WD and 4WD); Land Cruiser 100, 200, and 250 Series; Lexus GX470, GX460, GX550, LX470, and LX570.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the factory front bump stop on Toyota and Lexus trucks\u003c\/li\u003e\n\u003cli\u003eNatural rubber softens front-end bottom-outs with no air lines or hydraulic fluid involved\u003c\/li\u003e\n\u003cli\u003eOne kit, no upkeep: nothing to adjust, recharge, or rebuild, unlike hydraulic bump stops\u003c\/li\u003e\n\u003cli\u003eMounts in the factory bump stop holes with the supplied fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eFits stock trucks and many lifted Toyota builds\u003c\/li\u003e\n\u003cli\u003eLocknuts included in case a seized factory nut is damaged on removal\u003c\/li\u003e\n\u003cli\u003eHelps keep oversized front tires away from the fender liners when the front end compresses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790307938385,"sku":"FDCP_ABSTOF","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/a9461ca1de7682da162fc1ed5532083cb32004dfc52944561b7ba90ab444fb8d.jpg?v=1791975249"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-torttndr","title":"Timbren Rear SES Truck Camper Kit, 2022-2026 Toyota Tundra \u0026 2024-2026 Tacoma","description":"\u003cp\u003eTimbren SES Suspension Enhancement System Truck Camper Kit gives the 2022-2026 Toyota Tundra and 2024-2026 Tacoma heavy-duty rear support for slide-in campers.\nA slide-in camper puts a heavy, top-heavy load right over the rear axle, and it stays there for the whole trip. The rear end squats, the front tires lose grip, the headlights shine into oncoming traffic, and the truck rolls and sways through every curve and gust.\nThe Truck Camper Kit is Timbren's heaviest-duty option for the new Tundra and Tacoma. It holds the rear up so the truck sits level, steers with full front-tire traction, and stays steady with the camper on. Take the camper off, and the ride stays comfortable.\nFits the 2022-2026 Toyota Tundra and 2024-2026 Toyota Tacoma in 2WD and 4WD. Like any helper spring, it does not raise the truck's GVWR or payload rating, so always load within factory limits. Lifted Tundra? Add the Timbren SPCRTORTNDR spacer kit. For everyday towing on a Tacoma, see the Timbren TORSEQ3 kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty Patented Aeon® hollow rubber springs built for weight that stays on all season\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines, so nothing needs inflating or checking\u003c\/li\u003e\n\u003cli\u003eSwaps in for the factory bump stop using the factory fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eTimbren rates it a driveway job of under half an hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308003921,"sku":"FDCP_TORTTNDR","price":434.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/5c13f788a51c0d091f756ac585108afa6db74e06b83cb068b2a78add16055c8b.jpg?v=1791975429"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-absfr1504e","title":"Timbren Rear Active Off-Road Bumpstops, 2015-2026 Ford F-150 (Non-Raptor)","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear factory bump stops on your 2015-2026 Ford F-150 with a progressive cushion built for real trail abuse.\nThe factory stops are a last line of defense, not a suspension component. When the rear axle runs out of travel in a washout, a set of whoops, or a pothole with a loaded bed, that hard stop sends the hit straight into your frame, your shocks, and your spine.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out of it instead of slamming and kicking, so the truck stays composed, the rear end stays planted, and a long day on dirt leaves you less beat up. Your suspension keeps its full travel; you only feel the difference when you need it most.\nBuilt for F-150 owners who trail ride, overland with a loaded bed, or spend serious miles on gravel and washboard. Bolts in at the factory bump stop location with no drilling. Fits 2WD and 4WD trucks across the lineup; Raptor and F-150 Lightning are not covered by this kit. It uses the same mount as the Timbren FR1504E and FRTT1504E SES kits, so choose bumpstops for off-road use or SES for towing and hauling, not both.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring takes the place of the F-150's factory rear bump stop\u003c\/li\u003e\n\u003cli\u003eSelf-dampening natural rubber cushions each hit, with no air lines or hydraulic fluid to fail\u003c\/li\u003e\n\u003cli\u003eNothing to recharge, rebuild, or adjust on your F-150, unlike hydraulic bump stops\u003c\/li\u003e\n\u003cli\u003eMounts in the factory bump stop holes, no drilling\u003c\/li\u003e\n\u003cli\u003eLower cup clamps to the axle with the supplied fasteners, no welding\u003c\/li\u003e\n\u003cli\u003eHelps keep larger aftermarket tires from contacting the F-150's rear fenders at full compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308036689,"sku":"FDCP_ABSFR1504E","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/46a512f76e0583301eaed7f291f690b528ada693bc1219775a8368d456a30bc8.jpg?v=1791975253"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-absosr","title":"Timbren Rear Active Off-Road Bumpstops, 2000-2021 Toyota Tundra \u0026 2005-2023 Tacoma","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear bump stops on the 2000-2021 Toyota Tundra and 2005-2023 Tacoma with a progressive cushion for the trail.\u003c\/p\u003e\u003cp\u003eFirst and second gen Tundras and second and third gen Tacomas get built for the long haul: bed racks, rooftop tents, recovery gear, and a week of supplies for the backcountry. Load one up and run a washed-out trail, and the rear axle will find the end of its travel. The factory stop meets it with a hard hit that rattles the frame, the shocks, and everyone in the cab.\u003c\/p\u003e\u003cp\u003eActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the truck stays composed through rough sections and a long day on dirt is easier on it and on you. Your suspension keeps its full travel; you only feel the difference when you need it most.\u003c\/p\u003e\u003cp\u003eInstalls at the factory bump stop location under the axle U-bolts. Fits the 2000-2021 Toyota Tundra and 2005-2023 Toyota Tacoma in 2WD and 4WD. Driving a 2022+ Tundra or 2024+ Tacoma? See the Timbren ABSTORTNDR rear kit. Tacoma owners who want the U-bolts tucked up out of the rocks can step up to the Timbren ABSTRFK kit. If your truck tows more than it crawls, the Timbren TORTUN4 or TORTTN SES kit goes in the same spot instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the factory rear bump stop on Tundra and Tacoma\u003c\/li\u003e\n\u003cli\u003eNatural rubber damps on contact, so there are no air lines or hydraulic fluid to service\u003c\/li\u003e\n\u003cli\u003eZero upkeep on an older Tundra or Tacoma: nothing to adjust, recharge, or rebuild\u003c\/li\u003e\n\u003cli\u003eBracket mounts on the axle under the factory U-bolts with the supplied hardware\u003c\/li\u003e\n\u003cli\u003eHelps keep bigger tires on a Tundra or Tacoma from reaching the rear fender at full stuff\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308069457,"sku":"FDCP_ABSOSR","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/058327640fd2f20fb2508ab61616fd07617d78de719d283020dc767e2bbad2dc.jpg?v=1791975257"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstor4r","title":"Timbren Rear Active Off-Road Bumpstops, 1990-2002 Toyota 4Runner 4WD","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear bump stops on the 1990-2002 Toyota 4Runner 4WD with a progressive cushion built for the trail.\nSecond and third gen 4Runners are still some of the most capable rigs on the trail, and plenty of them now carry lifts, armor, and a full load of gear. When the solid rear axle runs out of travel on a ledge or a washout, the factory stop answers with a hard hit that goes straight into an aging frame, the shocks, and the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the rear end stays composed and a long day on dirt is easier on the truck and on you. Your suspension keeps its full travel; you only feel the difference when you need it most.\nFits the 1990-2002 Toyota 4Runner 4WD, covering the second and third generations. The Timbren TOR4R SES kit uses the same mount, so it is one or the other: bumpstops for trail control, SES for load support.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the 4Runner's factory rear bump stop\u003c\/li\u003e\n\u003cli\u003eNatural rubber cushions the solid rear axle with no air lines or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eNo maintenance on an older 4Runner: nothing to adjust, recharge, or rebuild\u003c\/li\u003e\n\u003cli\u003eOptional rubber spacers let you tune where the bump stop engages\u003c\/li\u003e\n\u003cli\u003eWorks on stock and lifted 4Runners alike\u003c\/li\u003e\n\u003cli\u003eTimbren recommends professional installation\u003c\/li\u003e\n\u003cli\u003eHelps keep upsized rear tires out of the 4Runner's fender wells when the axle stuffs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308102225,"sku":"FDCP_ABSTOR4R","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/622140e06c286b830ac1e4d11917e710ce2952217209016c2786dfef396d7e2e.jpg?v=1791975261"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstoflc1","title":"Timbren Front Active Off-Road Bumpstops, 1984-1998 Land Cruiser 70 Series (Leaf Spring)","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the front bump stops on the 1984-1998 Toyota Land Cruiser 70 Series with leaf-spring front suspension.\nA solid-axle 70 Series will take on terrain most trucks avoid, and the front axle eventually finds the end of its travel on ledges, ruts, and washouts. The factory stop meets it with a hard hit that goes straight into the frame, the leaf packs, and the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the front end stays composed and a long day on the trail is easier on the truck and on you. Your suspension keeps its full travel; you only feel the difference when you need it most. Timbren recommends running front and rear kits together for the best result on rough terrain.\nBolts on at the factory bump stop location. Fits 1984-1998 Land Cruiser 70 Series with leaf-spring front suspension only. Coil-spring 70 Series, 80 Series, and Lexus LX450 trucks use the Timbren ABSTOFLC1A front kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces your Land Cruiser's factory front bump stop\u003c\/li\u003e\n\u003cli\u003eNatural rubber cushions the front axle at full compression, with no air lines or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eA rebuild-free upgrade for a working truck: nothing to adjust or recharge, unlike hydraulic bump stops\u003c\/li\u003e\n\u003cli\u003ePainted steel brackets bolt on with the supplied hardware\u003c\/li\u003e\n\u003cli\u003eHelps keep larger front tires from striking the Land Cruiser's fenders at full compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308134993,"sku":"FDCP_ABSTOFLC1","price":269.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/93066c79f7baea5d08147a85495deac053892ec355b0373513de242c11a3594d.jpg?v=1791975263"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstortndr","title":"Timbren Rear Active Off-Road Bumpstops for 2022+ Tundra, 2024+ Tacoma \u0026 2025+ 4Runner","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear bump stops on the new Toyota Tundra, Tacoma, 4Runner, Sequoia, Land Cruiser, and Lexus GX550.\nToyota's latest trucks and SUVs ride on a modern multi-link rear end that soaks up rough ground well, right up until the axle runs out of travel. Drop into a washout or catch a whoop section at speed, and the factory stop answers with a hard hit that goes straight into the frame, the shocks, and the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the new Tundra, Tacoma, or 4Runner lands softer off ledges and G-outs and stays planted for the next hit. Full suspension travel stays intact; the cushion only shows up when the axle reaches the end of it.\nBolts on at the factory bump stop location. Fits the 2022-2026 Toyota Tundra 4WD, 2024-2026 Tacoma, 2025-2026 4Runner 4WD, 2023-2026 Sequoia, 2024-2026 Land Cruiser 250 Series, and 2024-2026 Lexus GX550. Hauling or towing instead? The Timbren TORSEQ3 and TORTTNDR SES kits bolt into this same location, so choose the kit that fits the job.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the factory rear bump stop on the latest Toyota and Lexus trucks\u003c\/li\u003e\n\u003cli\u003eNatural rubber damps each hit with no air lines or hydraulic fluid to leak or fade\u003c\/li\u003e\n\u003cli\u003eNo upkeep on a new truck you plan to keep: nothing to adjust, recharge, or rebuild\u003c\/li\u003e\n\u003cli\u003eSide-specific brackets bolt on with the factory fasteners\u003c\/li\u003e\n\u003cli\u003eCompatible with lifted suspensions\u003c\/li\u003e\n\u003cli\u003eHelps keep aftermarket tires off the rear fender liners on the latest Toyota and Lexus trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790308724817,"sku":"FDCP_ABSTORTNDR","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/03b9614a178f6c1b4502a730d8a0fffde2c8f279c8cdb80e9039e38c54f7542a.jpg?v=1791975267"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstoflc1a","title":"Timbren Front Active Off-Road Bumpstops for Land Cruiser 80 Series \u0026 Lexus LX450","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the front bump stops on the 1991-1997 Toyota Land Cruiser 80 Series and the 1996-1997 Lexus LX450.\nThe 80 Series is a legend on the trail, and its solid front axle will happily drop into ledges, ruts, and washouts until it runs out of travel. When it does, the factory stop answers with a hard hit that goes straight into the frame, the steering, and the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the front end holds its line over rocks and ruts and a long day on the trail is easier on the truck and on you. Your suspension keeps its full travel; you only feel the difference when you need it most. Timbren recommends running front and rear kits together for the best result on rough terrain.\nInstalls at the factory bump stop location with no drilling. Fits the 1991-1997 Land Cruiser 80 Series, the 1996-1997 Lexus LX450, and coil-spring 70 Series trucks. Leaf-spring 70 Series trucks use the Timbren ABSTOFLC1, and the Land Cruiser 100, 200, and 250 Series use the Timbren ABSTOF.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the factory front bump stop on the Land Cruiser and its Lexus twin\u003c\/li\u003e\n\u003cli\u003eNatural rubber takes the sting out of front-end bottom-outs with no air lines or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eNothing to adjust, recharge, or rebuild on a classic Land Cruiser, unlike hydraulic bump stops\u003c\/li\u003e\n\u003cli\u003ePainted steel brackets mount in the factory bump stop holes with the supplied fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eWorks with stock and lifted suspensions\u003c\/li\u003e\n\u003cli\u003eHelps stop bigger front tires from reaching the fender lips on a classic Land Cruiser or its Lexus twin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790309216337,"sku":"FDCP_ABSTOFLC1A","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/2efa3d260539b421b8a9b9c7f71fe8b387996780e2d1b22d2013f40ca04b4a6b.jpg?v=1791975270"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstrfk","title":"Timbren Rear Active Off-Road Bumpstops with U-Bolt Flip Kit, 2005-2023 Toyota Tacoma","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear bump stops on the 2005-2023 Toyota Tacoma and come with a U-bolt flip kit for the trail.\nSecond and third gen Tacomas get worked hard off-road, loaded with gear and pointed at the rockiest line on the trail. When the rear axle runs out of travel on a ledge or a washout, the factory stop answers with a hard hit that goes straight into the frame, the leaf packs, and the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the rear end stays composed and a long day on dirt is easier on the truck and on you. Your suspension keeps its full travel; you only feel the difference when you need it most. Timbren recommends running front and rear kits together for the best result on rough terrain.\nFits the 2005-2023 Toyota Tacoma in 2WD and 4WD. Need load support instead? The Timbren TORTUN4 and TORTUN4L SES kits mount in the same place, so run one or the other.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the Tacoma's factory rear bump stop\u003c\/li\u003e\n\u003cli\u003eNatural rubber softens rear axle bottom-outs on rocky lines, with no air lines or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eNothing to adjust, recharge, or rebuild once it is on the Tacoma\u003c\/li\u003e\n\u003cli\u003eU-bolt flip kit moves the U-bolts up and away from rocks for more ground clearance under the axle\u003c\/li\u003e\n\u003cli\u003eFresh U-bolts and brackets included, so the factory U-bolts are not reused\u003c\/li\u003e\n\u003cli\u003eCompatible with lifted suspensions and many lift kits\u003c\/li\u003e\n\u003cli\u003eHelps keep bigger tires out of the Tacoma's rear fender wells at full compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790309806161,"sku":"FDCP_ABSTRFK","price":434.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/7f647e3960175ee3794900b7d1d1418a0f52337808de07a5a2dfcf0e8bff221a.jpg?v=1791975274"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-ff150g","title":"Timbren Front SES Suspension Enhancement System, 2015-2020 Ford F-150 4WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System front kit adds load support to the 2015-2020 Ford F-150 4WD for plows, winch bumpers, and heavy gear.\u003c\/p\u003e\u003cp\u003eBolt a steel winch bumper, a winch, or a snowplow onto the front of an F-150 and the nose starts to sag. The truck sits rake-down, the headlights aim at the road instead of down it, and the front end dives and bottoms out under hard braking and on rough pavement.\u003c\/p\u003e\u003cp\u003eThe Timbren SES front kit carries that extra weight so your F-150 sits level again, the headlights point down the road, and the nose stops diving every time you hit the brakes. Take the plow or bumper off, and the factory ride comes right back.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits the 2015-2020 Ford F-150 4WD. Not for the F-150 Raptor. For 2021 and newer F-150 4WD trucks, see the Timbren FF150H front kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs carry the extra weight on the front of your F-150\u003c\/li\u003e\n\u003cli\u003eNo air bags or compressors: nothing to inflate, adjust, or leak in the cold\u003c\/li\u003e\n\u003cli\u003eSprings rest on the lower control arms for steady support\u003c\/li\u003e\n\u003cli\u003eBolts to the factory frame extensions through existing holes using the supplied fastener keys, no drilling\u003c\/li\u003e\n\u003cli\u003eSpiral wrap included to shield the brake line from the bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790310101073,"sku":"FDCP_FF150G","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/3f842cb7852b4aa5501fcba06d9611a1676c7e09450fd57db7e60e5ba9c20e75.jpg?v=1791975278"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-ff350sd2","title":"Timbren Front SES Suspension Enhancement System, 1999-2026 F-250\/F-350 Super Duty 2WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System front kit adds load support to the 1999-2026 Ford F-250 and F-350 Super Duty 2WD.\u003c\/p\u003e\u003cp\u003eA two-wheel-drive Super Duty works for a living. Hang a heavy front bumper, a winch, or a work setup off the front, or carry a heavy load day after day, and the front end starts to sag and bottom out over bumps, potholes, and job-site entrances.\u003c\/p\u003e\u003cp\u003eThe Timbren SES front kit supports that front-end weight so the truck sits level, steers with confidence, and stops crashing into its factory stops on rough roads, while keeping the factory ride when the truck is empty.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits 1999-2026 F-250 and F-350 Super Duty 2WD pickups, 1999-2004 F-350 Super Duty 2WD cab and chassis, and the 2000-2005 Ford Excursion 2WD. Not for 4WD trucks.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs carry the added front-end weight on a 2WD Super Duty\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines on the front axle: nothing to inflate or leak\u003c\/li\u003e\n\u003cli\u003eSprings usually rest in contact with the axle for steady support\u003c\/li\u003e\n\u003cli\u003eReplaces the factory front bump stop and mounts in the existing holes with the supplied fasteners, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790310658129,"sku":"FDCP_FF350SD2","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/3e6a1c7877c2256f19fc87c9a50ea7147a96ad6c8340b0cd04100556b89e1536.jpg?v=1791975280"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-frtt350j","title":"Timbren Rear SES Severe Service Kit, 2017-2026 Ford F-250\/F-350 \u0026 2015-2026 F-450 Super Duty","description":"\u003cp\u003eTimbren SES Suspension Enhancement System Severe Service rear kit gives the Ford F-250, F-350, and F-450 Super Duty heavy-duty support for towing and hauling.\nSuper Duty owners hitch up the heaviest stuff on the road: fifth-wheels, gooseneck trailers, big slide-in campers, and service bodies loaded with tools. Even a truck built for it squats under that kind of weight, and the rig starts to rock, sway, and wander at highway speed.\nThe Severe Service kit is Timbren's heavier-duty answer for that kind of constant weight. It holds the back of the truck up so it sits level, tracks straight, and stays planted load after load, and the truck still rides like stock when it is unhitched.\nBolts on with no drilling. Fits 2017-2026 Ford F-250 and F-350 Super Duty pickups in 2WD and 4WD, and the 2015-2026 F-450 Super Duty pickup in 2WD and 4WD. For lighter towing on an F-250, see the standard Timbren FR250SDJ rear kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavier-duty Patented Aeon® hollow rubber springs than the standard Super Duty SES kit\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines: nothing to inflate before you hook up\u003c\/li\u003e\n\u003cli\u003eTakes the place of the factory bump stop using the existing holes and factory fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eBuilt around the factory axle contact peg where equipped, so the peg stays put\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790311018577,"sku":"FDCP_FRTT350J","price":434.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/381375e8b81d788742d2f599d214d2d9a12c8b68ba708c78fe931d2d5d06f578.jpg?v=1791975432"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-tortun4","title":"Timbren Rear SES Kit, 2005-2023 Toyota Tacoma (4-Leaf Rear) \u0026 2000-2021 Tundra","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the Toyota Tacoma and Tundra for towing and hauling.\u003c\/p\u003e\u003cp\u003eHitch up a camper, a boat, or a loaded utility trailer, or fill the bed with gear, and the rear leaf springs give in. The truck squats, the headlights point high, steering goes light, and the trailer starts pushing the truck around on the highway.\u003c\/p\u003e\u003cp\u003eThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and feels planted under load. Unhitch, and the truck rides the way it did from the factory. Like any helper spring, it does not raise the truck's GVWR or payload rating.\u003c\/p\u003e\u003cp\u003eFits 2005-2023 Toyota Tacoma with the factory four-leaf rear spring pack, plus 2005-2016 Tacoma PreRunner, and 2000-2021 Toyota Tundra in 2WD and 4WD. Three-leaf Tacomas take the Timbren TORTUN4L kit. For campers and top-heavy loads, see the Timbren TORTTN Severe Service kit; lifted Tacomas and Tundras may need the SPCRTORTUN4 spacer kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as a four-leaf Tacoma or Tundra loads up\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines: nothing to inflate or adjust\u003c\/li\u003e\n\u003cli\u003eMounts to the axle under the factory U-bolts, which are retightened to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790311444561,"sku":"FDCP_TORTUN4","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/a12b8cfcfc5488fdbc90a14e8bf7615a13fa50ead8f9ec95b95cc7424fdea0be.jpg?v=1791975435"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-torttn","title":"Timbren Rear SES Severe Service Kit, 2005-2023 Toyota Tacoma \u0026 2000-2021 Tundra","description":"\u003cp\u003eTimbren SES Suspension Enhancement System Severe Service rear kit gives the Toyota Tacoma and Tundra heavy-duty support for campers and top-heavy loads.\nA slide-in truck camper, a loaded roof rack and bed rack, or a heavy trailer tongue puts a lot of weight high and at the back of a Tacoma or Tundra. The rear leaf springs sag, the truck leans in every corner, and crosswinds and passing semis push it around on the highway.\nThe Severe Service kit is built for exactly that kind of top-heavy, constant weight. Timbren trades a little ride softness for a lot more stability, so the truck stays level, leans less, and feels planted when it is loaded to the roof.\nFits 2005-2023 Tacoma 4WD and 2016-2023 Tacoma 2WD with the factory four-leaf rear spring pack, and 2000-2021 Tundra in 2WD and 4WD. Count the leaves before ordering: Tacomas with the three-leaf pack take the Timbren TORTTNL kit. Lifted? Add the Timbren SPCRTORTTN spacer kit. For everyday towing with a softer ride, see the standard Timbren TORTUN4 kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-convolute Aeon® hollow rubber springs push back harder than the standard Tacoma and Tundra SES kit\u003c\/li\u003e\n\u003cli\u003eSprings engage only when weight is added, so the empty truck rides close to factory\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines, so there is nothing to leak down while parked\u003c\/li\u003e\n\u003cli\u003eSits on top of the four-leaf pack under the factory U-bolts, retightened to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790311936081,"sku":"FDCP_TORTTN","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/b12766d2fed487d246164e545945737043daf096ef25b5b28a471c390f1c64ca.jpg?v=1791975439"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-frtt1504e","title":"Timbren Rear SES Severe Service Kit, 2015-2026 Ford F-150","description":"\u003cp\u003eTimbren SES Suspension Enhancement System Severe Service rear kit gives the 2015-2026 Ford F-150 heavy-duty load support for towing and hauling.\u003c\/p\u003e\u003cp\u003eSome F-150s never get a day off. A slide-in camper that stays on all season, a work truck loaded with tools and materials every morning, or a heavy travel trailer behind it every weekend will flatten the rear end, leave the nose pointing up, and turn every highway gust into a fight.\u003c\/p\u003e\u003cp\u003eThe Severe Service kit is Timbren's heavier-duty answer for that kind of constant weight. It holds the back of the truck up so it sits level, tracks straight, and stays planted load after load, and the truck still rides like stock when the bed is empty.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits every standard 2015-2026 Ford F-150 trim in 2WD and 4WD, including Tremor, STX, Police Responder, and SSV. Not for the F-150 Raptor. For lighter towing and hauling, see the standard Timbren FR1504E rear kit; lifted trucks may need the SPCRFR1504E spacer kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavier-duty Patented Aeon® hollow rubber springs than the standard F-150 SES kit\u003c\/li\u003e\n\u003cli\u003eNothing to pump up, adjust, or leak: no air bags, compressors, or lines\u003c\/li\u003e\n\u003cli\u003eTakes the place of the factory bump stop, uses the existing holes, and clamps to the axle with the supplied hardware, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790312263761,"sku":"FDCP_FRTT1504E","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/6ab6dbd0b0f130d8a887295aafadd09608c7b6240a26e20dd2db6f320e5dd6e6.jpg?v=1791975442"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-torseq3","title":"Timbren Rear SES Kit for 2023+ Sequoia, 2024+ Tacoma, 2025+ 4Runner \u0026 Land Cruiser","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the new Toyota Sequoia, Tacoma, 4Runner, Land Cruiser, Lexus GX550, and LX600.\nToyota's latest SUVs and trucks are built to tow and travel, and owners load them up: a camper or boat behind, a full cargo area, a rooftop tent above. That weight pushes the multi-link rear down, the nose lifts, the headlights aim high, and the trailer starts steering the vehicle on the highway.\nThe Timbren SES rear kit holds the back end up as the weight comes on, so it sits level, tracks straight, and feels planted under load. Unhitch, and it rides like it did from the factory.\nBolts on with no drilling. Fits the 2023-2026 Toyota Sequoia, 2024-2026 Tacoma, 2025-2026 4Runner 4WD, 2024-2026 Land Cruiser, 2024-2026 Lexus GX550, and 2022-2026 Lexus LX600. Not for models with Active Height Control (AHC). Looking for off-road bottom-out control instead of load support? See the Timbren ABSTORTNDR rear bumpstop kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as the Sequoia, Tacoma, or 4Runner loads up\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to inflate, adjust, or leak\u003c\/li\u003e\n\u003cli\u003eReplaces the factory bump stop and bolts up with the factory fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eDriveway install in under half an hour, per Timbren\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790313115729,"sku":"FDCP_TORSEQ3","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/2533946e998c3a7c569679b7c72b9fccbe42d977079e7a28ef25a86a8273097d.jpg?v=1791975444"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-abstorseq","title":"Timbren Rear Active Off-Road Bumpstops for 4Runner, FJ Cruiser \u0026 Land Cruiser 100","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear bump stops on the 4WD Toyota 4Runner, FJ Cruiser, Land Cruiser 100 Series, and Lexus GX and LX470.\nThese Toyotas get built for the long haul: roof racks, drawers, recovery gear, and a family's worth of camping kit. Load one up and run a rutted trail, and the solid rear axle will find the end of its travel. The factory stop meets it with a hard hit that goes straight into the frame, the shocks, and everyone inside.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so a loaded 4Runner, FJ, or Land Cruiser stays settled through whoops and washouts, and the people inside stop bracing for every dip. Your suspension keeps its full travel; the bumpstops only come into play at the end of it.\nInstalls at the factory bump stop location with no drilling. Fits 4WD Toyota 4Runner 2003-2024, FJ Cruiser 2007-2014, Land Cruiser 100 Series 1998-2007, Lexus GX470 2003-2009, GX460 2010-2023, and LX470 1998-2007. The Land Cruiser 200 Series is not covered by this kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the factory rear bump stop on 4Runner, FJ, Land Cruiser, and Lexus\u003c\/li\u003e\n\u003cli\u003eNatural rubber cushions heavy overland loads at full compression, with no air lines or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eBuilt for long trips far from a shop: nothing to adjust, recharge, or rebuild\u003c\/li\u003e\n\u003cli\u003ePainted brackets drop into the factory bump stop holes with the supplied fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eCompatible with lifted suspensions and any lift kit\u003c\/li\u003e\n\u003cli\u003eHelps keep larger rear tires from rubbing the fenders on a loaded overland build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790313934929,"sku":"FDCP_ABSTORSEQ","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/8c849fd8c93a38862e22c0342d8502f377b747a07a802f76051ad520be598aaa.jpg?v=1791975284"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-absfrrgr","title":"Timbren Rear Active Off-Road Bumpstops, 2019-2026 Ford Ranger (Non-Raptor)","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear factory bump stops on your 2019-2026 Ford Ranger with a progressive cushion built for the trail.\nA midsize truck gets pushed hard off-road. Load the bed with camping gear, air down, and hit a rutted two-track or a washed-out climb, and the rear axle will find the end of its travel. The factory stop meets it with a hard hit that rattles the frame, the shocks, and everyone in the cab.\nActive Off-Road Bumpstops change how that moment feels. The axle settles into the stop and eases back out instead of slamming and kicking, so the Ranger stays composed through rough sections and a long day on dirt is easier on the truck and on you. Your suspension keeps its full travel; you only feel the difference when you need it most.\nBuilt for Ranger owners who trail ride, overland with a loaded bed, or run washboard and backroads every weekend. Installs at the factory bump stop location with no drilling. Fits 2019-2020 Rangers and 2021-2026 XL, XLT, and Lariat trucks in 2WD and 4WD; the Ranger Raptor is not covered by this kit. These bumpstops share their mount with the Timbren FRRGR SES kit, so pick the one that matches how you use the truck.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring replaces the Ranger's factory rear bump stop\u003c\/li\u003e\n\u003cli\u003eNatural rubber cushions every bottom-out on its own, with no air lines or hydraulic fluid on the truck\u003c\/li\u003e\n\u003cli\u003eSet it and forget it: nothing on your Ranger to adjust, recharge, or rebuild\u003c\/li\u003e\n\u003cli\u003eMounts to the frame in the factory bump stop holes with the supplied hardware, no drilling\u003c\/li\u003e\n\u003cli\u003eHelps stop upsized tires from rubbing the Ranger's rear fenders on hard compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790314557521,"sku":"FDCP_ABSFRRGR","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/ddd5676f9d7cae5398e722e349df2dc198f6880fcb9b322c14739e7daf2cb3e2.jpg?v=1791975287"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-torxr","title":"Timbren Rear SES Suspension Enhancement System, 2005-2015 Toyota Tacoma 2WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2005-2015 Toyota Tacoma 2WD, including PreRunner and X-Runner models.\nA two-wheel-drive Tacoma is a working truck for a lot of owners: a utility trailer on weekends, a bed full of tools during the week. Load it up and the rear squats, the headlights point high, steering goes light, and the truck bottoms out over every dip and driveway.\nThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and stops bottoming out under load. Unload it, and the Tacoma rides the way it did from the factory. Like any helper spring, it does not raise the truck's GVWR or payload rating.\nFits the 2005-2015 Toyota Tacoma 2WD with leaf-spring rear suspension, including Base, PreRunner, TRD Sport, and X-Runner models. Not for 4WD trucks; 4WD Tacomas take the Timbren TORTUN4 or TORTUN4L kit depending on leaf count.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as a 2WD Tacoma, PreRunner, or X-Runner loads up\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to inflate or leak\u003c\/li\u003e\n\u003cli\u003eTakes the factory bump stop's place and bolts up with the factory fasteners, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790315409489,"sku":"FDCP_TORXR","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/f9a6d57729635f051e4c755435cc47d2b20844175466f9929decda84a2e2431f.jpg?v=1791975447"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-ff150h","title":"Timbren Front SES Suspension Enhancement System, 2021-2026 Ford F-150 4WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System front kit adds load support to the 2021-2026 Ford F-150 4WD for plows, winch bumpers, and heavy gear.\u003c\/p\u003e\u003cp\u003eBolt a steel winch bumper, a winch, or a snowplow onto the front of a 14th gen F-150 and the nose starts to sag. The truck sits rake-down, the headlights aim at the road instead of down it, and the front end dives and bottoms out under hard braking and on rough pavement.\u003c\/p\u003e\u003cp\u003eThe Timbren SES front kit puts that weight back where it belongs. It supports the added load so the truck sits level, steers with confidence, and stops diving every time you touch the brakes, while keeping the factory ride when the extra weight comes off.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits the 2021-2026 Ford F-150 4WD in XL, XLT, Lariat, King Ranch, Platinum, Limited, and Tremor trims. Not for the F-150 Raptor. For 2015-2020 F-150 4WD trucks, see the Timbren FF150G front kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs support the added front-end weight on the 14th gen F-150\u003c\/li\u003e\n\u003cli\u003eNothing to pump up or leak: no air bags, compressors, or lines\u003c\/li\u003e\n\u003cli\u003eSprings rest on the lower control arms for constant support\u003c\/li\u003e\n\u003cli\u003eMounts to the factory frame extensions using existing holes and the supplied fastener keys, no drilling\u003c\/li\u003e\n\u003cli\u003eBracket has a built-in groove and clip slot that route the brake line safely, with spiral wrap included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790315933777,"sku":"FDCP_FF150H","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/1a31d2be9f775289cd193649cfa95678208d4ea497a97b3739eb94da2a3e633c.jpg?v=1791975290"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-fr250sdf","title":"Timbren Rear SES Suspension Enhancement System, 2005-2010 Ford F-250 Super Duty","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2005-2010 Ford F-250 Super Duty for towing and hauling.\nA Super Duty from this era is still doing real work: pulling travel trailers, hauling a bed full of materials, or carrying a slide-in camper. Load it up and the rear squats, the nose lifts, the headlights point high, and the truck wallows and sways on the highway.\nThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and feels planted under load. Unload it, and the truck rides like it always has.\nBolts on with no drilling. Fits the 2005-2010 Ford F-250 Super Duty in 2WD and 4WD.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs pick up the load on the 2005-2010 Super Duty\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to inflate, check, or leak\u003c\/li\u003e\n\u003cli\u003eReplaces the factory bump stop and mounts in the existing holes with the supplied hardware, no drilling\u003c\/li\u003e\n\u003cli\u003eWorks with the factory axle contact peg where fitted, so nothing comes off the axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790316949585,"sku":"FDCP_FR250SDF","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/7f46a7c90c508ee96130415911baeefbb233a3448418a9602b258c081faa51fa.jpg?v=1791975293"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-frrgr","title":"Timbren Rear SES Suspension Enhancement System, 2019-2026 Ford Ranger","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2019-2026 Ford Ranger for towing, hauling, and camping.\nThe Ranger is rated to tow and haul more than most people expect, and owners use every bit of it: a small camper, a pair of dirt bikes, a bed full of overland gear. Load it up and the rear end squats, the headlights point high, steering goes light, and the trailer pushes the truck around.\nThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and feels planted under load. Unload it, and the Ranger rides like it did from the factory.\nBolts on with no drilling. Fits 2019-2022 Ford Ranger, all trims, and 2023-2026 Ranger XL, XLT, and Lariat, in 2WD and 4WD. The Ranger Raptor is not covered by this kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as the Ranger's load comes on\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines: nothing on the Ranger to inflate or leak\u003c\/li\u003e\n\u003cli\u003eFrame-mounted: replaces the factory bump stop and bolts into the existing hole, no drilling\u003c\/li\u003e\n\u003cli\u003eSimple three-piece kit per side with no brackets to fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790317670481,"sku":"FDCP_FRRGR","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/3c568df2a9731bffee475fc932f86bd6f2feb29be78ea9cabd2976759a4330f1.jpg?v=1791975296"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-ff350sdc","title":"Timbren Front SES Suspension Enhancement System, 2005-2026 F-250\/F-350 Super Duty 4WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System front kit adds load support to the 2005-2026 Ford F-250 and F-350 Super Duty 4WD.\nA 4WD Super Duty carries a lot of weight up front before you add anything: a heavy diesel, then a snowplow, a steel bumper, or a winch. Pile that on and the front end sags, the headlights aim low, and the nose dives and bottoms out on every pothole and frozen rut.\nThe Timbren SES front kit supports that front-end weight so the truck sits level, steers with confidence, and stops crashing down on rough roads, while keeping the factory ride when the plow or extra weight comes off.\nBolts on with no drilling. Fits 2005-2026 F-250 Super Duty 4WD, F-350 Super Duty 4WD pickups, and F-350 Super Duty cab and chassis in 2WD and 4WD. For 2WD F-250 and F-350 pickups, see the Timbren FF350SD2 front kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs carry heavy front-end loads on 4WD Super Duty and cab and chassis trucks\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to inflate, adjust, or leak on a working truck\u003c\/li\u003e\n\u003cli\u003eBolt-on install with the supplied hardware, no drilling\u003c\/li\u003e\n\u003cli\u003eRubber springs absorb road shocks and adjust automatically to uneven loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790318030929,"sku":"FDCP_FF350SDC","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/595422691490e6d4cf8fff53e20529cc9eae24d4b96781178dec78233f1c8acf.jpg?v=1791975298"},{"product_id":"suspension-bump-stop-kit-active-off-road-bumpstops-timbren-absfr150rc","title":"Timbren Rear Active Off-Road Bumpstops, 2021-2026 Ford F-150 Raptor \u0026 Raptor R","description":"\u003cp\u003eTimbren Active Off-Road Bumpstops replace the rear factory bump stops on your 2021-2026 Ford F-150 Raptor and Raptor R with a progressive cushion for speed.\u003c\/p\u003e\u003cp\u003eThe third gen Raptor is made to run hard across rough ground, and its long-travel rear suspension will use every bit of travel it has. When the axle runs out of room in a whoop section, a G-out, or a washout at speed, the factory stop delivers a hard hit that goes straight into the frame, the shocks, and the cab.\u003c\/p\u003e\u003cp\u003eActive Off-Road Bumpstops change how that moment lands. The axle settles into the stop and eases back out instead of slamming and kicking, so the truck stays settled for the next hit and a long day of desert or two-track leaves you fresher. Your suspension keeps its full travel; you only feel the difference when you need it most.\u003c\/p\u003e\u003cp\u003eBuilt for Raptor owners who run desert, dunes, and fast trails. Bolts on at the factory bump stop location. Fits the third gen 2021-2026 Raptor and Raptor R only; the 2017-2020 Raptor and the standard F-150 use their own Timbren kits.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber spring swaps in for the Raptor's factory rear bump stop\u003c\/li\u003e\n\u003cli\u003eNatural rubber damps itself on hard landings, with no nitrogen charge, air lines, or hydraulic fluid\u003c\/li\u003e\n\u003cli\u003eNo rebuild intervals or seal kits to budget for, unlike hydraulic race bump stops\u003c\/li\u003e\n\u003cli\u003eSide-specific left and right frame brackets bolt on with the supplied metric hardware\u003c\/li\u003e\n\u003cli\u003eHelps keep the Raptor's big tires off the rear fender liners when the suspension stuffs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790318358609,"sku":"FDCP_ABSFR150RC","price":269.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/958eb03befc4afec7246e145f2d1352b7df52ee2b1ed385d3b007996c660ae7d.jpg?v=1791975300"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-tor4r","title":"Timbren Rear SES Suspension Enhancement System, 1990-2002 Toyota 4Runner","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 1990-2002 Toyota 4Runner for towing, hauling, and overlanding.\u003c\/p\u003e\u003cp\u003eSecond and third gen 4Runners have earned a second life as overland rigs and trail tow vehicles, and decades-old rear springs were never meant for a rooftop tent, a full cargo area, and a small trailer. Load one up and the rear sags, the headlights aim at the treetops, and the truck wallows over every bump.\u003c\/p\u003e\u003cp\u003eThe Timbren SES rear kit holds the back of the 4Runner up as the weight comes on, so it sits level, tracks straight, and stops bottoming out under load. Unload it, and the ride stays the way it was.\u003c\/p\u003e\u003cp\u003eA bolt-on install. Fits the 1990-2002 Toyota 4Runner in 2WD and 4WD. Looking for off-road bottom-out control instead of load support? See the Timbren ABSTOR4R rear bumpstop kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as the 4Runner's load comes on\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to inflate, adjust, or leak on an older SUV\u003c\/li\u003e\n\u003cli\u003eBrackets bolt on with the supplied hardware, no welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790318653521,"sku":"FDCP_TOR4R","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/c28d5831ddfb70e722f5f276f0c167d5b2a3d4b34c6a887fdbcdf1a19fa06cd8.jpg?v=1791975452"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-frr0504a","title":"Timbren Rear SES Suspension Enhancement System, 1983-2007 Ford Ranger 4WD","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 1983-2007 Ford Ranger 4WD for towing and hauling.\u003c\/p\u003e\u003cp\u003eRangers this age still get asked to do big jobs: towing a utility trailer, hauling firewood, or carrying a bed full of camping gear. Load one up and the tired rear springs give in, the back squats, the headlights point up, and the truck wanders and bottoms out on every bump.\u003c\/p\u003e\u003cp\u003eThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, steers straight, and stops bottoming out under load. Unload it, and the truck rides the way it always has.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits the 1983-2007 Ford Ranger 4WD.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as a small Ranger loads up\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines on an older truck: nothing to inflate or leak\u003c\/li\u003e\n\u003cli\u003eUpper bracket mounts in the existing holes and the lower support clamps around the axle, no drilling\u003c\/li\u003e\n\u003cli\u003eLower support fits over the factory bump stop peg, so nothing on the axle is removed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790319145041,"sku":"FDCP_FRR0504A","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/e726de5c25efcd4ec141a30c5325769915bcd64b1b9a749c5d4a3c43ce723645.jpg?v=1791975304"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-fr250sdj","title":"Timbren Rear SES Suspension Enhancement System, 2017-2026 Ford F-250 Super Duty","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2017-2026 Ford F-250 Super Duty for towing and hauling.\nThe modern F-250 is built to tow, but a heavy travel trailer tongue, a fifth-wheel hitch, or a slide-in camper still pushes the rear end down. The truck squats, the nose lifts, the headlights point high, and the whole rig rocks and sways when trucks pass on the highway.\nThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and feels planted under load. Unhook, and the truck rides like it did from the factory.\nBolts on with no drilling. Fits 2017-2026 Ford F-250 Super Duty pickups in 2WD and 4WD, all cab styles.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take the load on the current-generation Super Duty\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or air lines to service\u003c\/li\u003e\n\u003cli\u003eReplaces the factory bump stop and mounts in the existing holes with the factory fasteners, no drilling\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the factory axle contact peg where equipped, so the peg stays in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790319210577,"sku":"FDCP_FR250SDJ","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/6762d3195efd60d9686014f23c894f43297aadb998d6700c3965d101054057f5.jpg?v=1791975307"},{"product_id":"coil-spring-spacer-kit-ses-spacer-kits-timbren-spcrtortndr","title":"Timbren SES Spacer Kit for Lifted 2022-2026 Toyota Tundra (TORTTNDR)","description":"\u003cp\u003eTimbren SES Spacer Kit lets the Timbren TORTTNDR rear helper springs do their job on a lifted or leveled 2022-2026 Toyota Tundra.\nA lift or leveling kit opens up the space between the frame and the rear axle. With a standard SES kit installed, that extra space means the rubber springs reach the axle too late, and the Tundra still squats when you hitch up a trailer or load a camper.\nThis kit closes the gap so the SES springs pick up the load right where they should, and your lifted Tundra sits level and tows with confidence.\nNot sure if you need it? With the SES kit installed and the truck empty, check the space between the rubber spring and its contact pad. If it is larger than the target listed in the specifications, add spacers. Fits 2022-2026 Toyota Tundra in 2WD and 4WD with a Timbren TORTTNDR rear kit installed.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMix-and-match spacers let you set the TORTTNDR springs for your Tundra's lift\u003c\/li\u003e\n\u003cli\u003eFits between the Aeon® spring and the TORTTNDR bracket, no drilling\u003c\/li\u003e\n\u003cli\u003eSuits leveling kits, body lifts, and full suspension lifts on the new Tundra\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790319571025,"sku":"FDCP_SPCRTORTNDR","price":58.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/c4cae61d3275b61a164d8b692337dc9d4f950e469945881321810d60929e1ed4.jpg?v=1791975455"},{"product_id":"coil-spring-spacer-kit-ses-spacer-kits-timbren-spcrfr1504e","title":"Timbren SES Spacer Kit for Lifted 2015-2026 Ford F-150 (FR1504E \/ FRTT1504E)","description":"\u003cp\u003eTimbren SES Spacer Kit lets Timbren FR1504E and FRTT1504E rear helper springs do their job on a lifted or leveled 2015-2026 Ford F-150.\u003c\/p\u003e\u003cp\u003eA lift or leveling kit opens up the space between the frame and the rear axle. With a standard SES kit installed, that extra space means the rubber springs never reach the axle in time, and the truck still squats when you hitch up or load the bed.\u003c\/p\u003e\u003cp\u003eThis kit closes the gap so the SES springs pick up the load right where they should, and your lifted F-150 sits level and tows with confidence.\u003c\/p\u003e\u003cp\u003eNot sure if you need it? With the truck empty, measure from the frame to the top of the rear axle and compare it to the range in the specifications. Fits 2015-2026 Ford F-150 in 2WD and 4WD with a Timbren FR1504E or FRTT1504E rear kit installed.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls between the Aeon® spring and the FR1504E or FRTT1504E bracket, no drilling\u003c\/li\u003e\n\u003cli\u003eWorks with leveling kits, body lifts, and full suspension lifts on the F-150or Lifted 2015-2026 Ford F-150 (FR1504E \/ FRTT1504E)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790319997009,"sku":"FDCP_SPCRFR1504E","price":58.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/aa0f46136ce929f17113bd83fb46ff4aea2c5e82a8fd3f6579e379132575934c.jpg?v=1791975459"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-tortun4l","title":"Timbren Rear SES Kit, 2005-2023 Toyota Tacoma (3-Leaf Rear)","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2005-2023 Toyota Tacoma with the three-leaf rear spring pack.\nMidsize trucks get asked to carry more than their rear springs were built for: a utility trailer, a pair of dirt bikes, a bed full of camping gear. Load one up and the rear squats, the headlights point high, steering goes light, and the truck bottoms out over every dip.\nThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and stops bottoming out under load. Unload it, and the truck rides the way it did from the factory. Like any helper spring, it does not raise the truck's GVWR or payload rating.\nFits 2005-2015 Tacoma 4WD and 2016-2023 Tacoma 2WD and 4WD with the factory three-leaf rear spring pack. Count the leaves before ordering: four-leaf Tacomas take the Timbren TORTUN4 kit. For campers and top-heavy loads on a three-leaf Tacoma, see the Timbren TORTTNL Severe Service kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as a three-leaf Tacoma loads up\u003c\/li\u003e\n\u003cli\u003eRubber only: no air bags, compressors, or lines to look after\u003c\/li\u003e\n\u003cli\u003eClamps to the axle under the factory U-bolts, retightened to factory spec afterward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790320357457,"sku":"FDCP_TORTUN4L","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/377a59b5b301c4e09fc1f8b1593a292f767c74557094770403e5ceeeb9262441.jpg?v=1791975461"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-fr1504e","title":"Timbren Rear SES Suspension Enhancement System, 2015-2026 Ford F-150","description":"\u003cp\u003eTimbren SES Suspension Enhancement System rear kit adds load support to the 2015-2026 Ford F-150 for towing, hauling, and camping.\u003c\/p\u003e\u003cp\u003eHook up a camper or a boat, or fill the bed with gear, and the F-150's rear end squats. The nose rises, the headlights aim at the sky, steering goes light, and the trailer starts to push the truck around on the highway.\u003c\/p\u003e\u003cp\u003eThe Timbren SES rear kit holds the back of the truck up as the weight comes on, so it sits level, tracks straight, and feels planted with a trailer behind it. Unhitch, and the truck rides like it did from the factory.\u003c\/p\u003e\u003cp\u003eBolts on with no drilling. Fits every standard 2015-2026 Ford F-150 trim in 2WD and 4WD, including Tremor, STX, Police Responder, and SSV. Not for the F-150 Raptor. For the heaviest loads, see the Timbren FRTT1504E Severe Service kit; lifted trucks may need the SPCRFR1504E spacer kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs take over as the F-150's load comes on\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines: nothing on the truck to inflate or leak\u003c\/li\u003e\n\u003cli\u003eReplaces the factory bump stop, mounts in the existing holes, and clamps to the axle with the supplied hardware, no drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790320783441,"sku":"FDCP_FR1504E","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/a419b5c494f0e7cb31bfec8bae27edbb5400d1a03b2f4b8d21b2081cc5298fc7.jpg?v=1791975310"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-torttnl","title":"Timbren Rear SES Severe Service Kit, 2005-2023 Toyota Tacoma (3-Leaf Rear)","description":"\u003cp\u003eTimbren SES Suspension Enhancement System Severe Service rear kit gives the 2005-2023 Toyota Tacoma heavy-duty support for campers and top-heavy loads.\nA slide-in camper, a bed rack loaded with gear, or a heavy trailer tongue puts serious weight high and at the back of a Tacoma. The rear springs sag, the truck leans in every corner, and crosswinds and passing semis push it around on the highway.\nThe Severe Service kit is built for exactly that kind of top-heavy, constant weight. Timbren trades a little ride softness for a lot more stability, so the Tacoma stays level, leans less, and feels planted when it is loaded up.\nThis version is for Tacomas with the factory three-leaf rear spring pack. Count the leaves in your rear spring before ordering: trucks with the four-leaf pack take the Timbren TORTTN kit instead. Fits 2005-2015 Tacoma 4WD and 2016-2023 Tacoma 2WD and 4WD.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-convolute Aeon® hollow rubber springs resist weight more aggressively than the standard three-leaf SES kit\u003c\/li\u003e\n\u003cli\u003eThe springs wait for the load, so an empty Tacoma stays close to its factory ride\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines to fill, adjust, or leak\u003c\/li\u003e\n\u003cli\u003eSits on top of the three-leaf pack under the factory U-bolts, which are retightened to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790321045585,"sku":"FDCP_TORTTNL","price":294.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/c792d992bff0dcc6eda6b507c0d9910e2a9ed005229fa0eb287a30a13382a0e2.jpg?v=1791975464"},{"product_id":"suspension-rubber-helper-spring-kit-ses-suspension-enhancement-system-timbren-toftac4a","title":"Timbren Front SES Suspension Enhancement System for 4Runner, FJ Cruiser \u0026 Lexus GX","description":"\u003cp\u003eTimbren SES Suspension Enhancement System front kit adds load support to the 4WD Toyota 4Runner, FJ Cruiser, and Lexus GX for bumpers, winches, and gear.\nBuild a 4Runner, FJ, or GX for overlanding and the weight piles up on the nose: a steel bumper, a winch, a skid plate, maybe a set of lights. The front end sags, the headlights aim at the road, and the independent front suspension starts bottoming out on washboard and potholes.\nThe Timbren SES front kit supports that added front-end weight so the truck sits level, steers with confidence, and stops crashing down over rough ground, while keeping the factory ride when the extra weight comes off.\nBolts on with no drilling. Fits 4WD Toyota 4Runner 1990-2024, FJ Cruiser 2007-2014, Lexus GX470 2003-2009, and Lexus GX460 2010-2023. Looking for off-road bottom-out control instead of load support? See the Timbren ABSTOF front bumpstop kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Aeon® hollow rubber springs carry the added front-end weight on 4Runner, FJ Cruiser, and GX\u003c\/li\u003e\n\u003cli\u003eNo air bags, compressors, or lines on a front end that sees trail use: nothing to inflate or leak\u003c\/li\u003e\n\u003cli\u003eSprings typically sit in contact for constant support\u003c\/li\u003e\n\u003cli\u003eReplaces the rear upper bump stop where four are fitted and bolts into the existing holes, no drilling\u003c\/li\u003e\n\u003cli\u003eTimbren calls for thread locker on the mounting bolts for a secure install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62790321602641,"sku":"FDCP_TOFTAC4A","price":294.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/c4f9c34cb99ef3e4c34af5c64b410a7ce3a7dda8d1499033459718bf2b370ea4.jpg?v=1791975467"},{"product_id":"coil-spring-spacer-kit-ses-spacer-kits-timbren-spcrtortun4","title":"Timbren SES Spacer Kit for Lifted Toyota Tacoma \u0026 Tundra (TORTUN4)","description":"\u003cp\u003eTimbren SES Spacer Kit lets the Timbren TORTUN4 rear helper springs do their job on a lifted or leveled Toyota Tacoma or Tundra.\u003c\/p\u003e\u003cp\u003eLift or level a Tacoma or Tundra and the rear leaf springs sit farther from the frame than the TORTUN4 kit expects. The rubber springs then pick up the load late, so the truck still sags when you hitch a trailer or fill the bed.\u003c\/p\u003e\u003cp\u003eStack in the right spacers and the SES springs start working at the correct point again, so your lifted Toyota sits level and tows the way it did before the lift.\u003c\/p\u003e\u003cp\u003eNot sure if you need it? With the truck empty, measure from the frame to the top of the rear leaf spring and compare it to the range in the specifications. Fits 2005-2023 Toyota Tacoma with the factory four-leaf rear suspension or the 2005-2016 PreRunner, and 2000-2021 Toyota Tundra, with a Timbren TORTUN4 rear kit installed.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMix-and-match spacers tune the TORTUN4 kit to your exact lift\u003c\/li\u003e\n\u003cli\u003eSlots between the Aeon® spring and the TORTUN4 bracket, no drilling\u003c\/li\u003e\n\u003cli\u003eHandles leveling kits, body lifts, and full suspension lifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62791023001681,"sku":"FDCP_SPCRTORTUN4","price":58.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/47d5a4b38c274d7571f4848e46277003daf857da49c92d31ed3b38494252dfcb-fx.webp?v=1791975449"},{"product_id":"coil-spring-spacer-kit-ses-spacer-kits-timbren-spcrtorttn","title":"Timbren SES Spacer Kit for Lifted Toyota Tacoma \u0026 Tundra (TORTTN)","description":"\u003cp\u003eTimbren SES Spacer Kit lets the Timbren TORTTN rear helper springs do their job on a lifted or leveled Toyota Tacoma or Tundra.\nA lift or leveling kit opens up the space between the frame and the rear leaf springs. With a standard SES kit installed, that extra space means the rubber springs engage too late, and the truck still squats under a camper, a trailer, or a loaded bed.\nThis kit closes the gap so the SES springs pick up the load right where they should, and your lifted Toyota sits level and hauls with confidence.\nNot sure if you need it? With the truck empty, measure from the frame to the top of the rear leaf spring and compare it to the range in the specifications. Fits 2005-2023 Toyota Tacoma with the factory four-leaf rear suspension and 2000-2021 Toyota Tundra, with a Timbren TORTTN rear kit installed.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMix-and-match spacer stack dials in the TORTTN for your Tacoma or Tundra's lift\u003c\/li\u003e\n\u003cli\u003eGoes between the Aeon® spring and the TORTTN bracket, no drilling\u003c\/li\u003e\n\u003cli\u003eMade for leveling kits, body lifts, and full suspension lifts on Toyota trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime\u003c\/p\u003e","brand":"Timbren","offers":[{"title":"Default Title","offer_id":62791026081873,"sku":"FDCP_SPCRTORTTN","price":58.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/files\/ef96af211c5f63f9e4efe6ad851dbce9e992c6617224582c4870fd558f29f599-fx.webp?v=1792413188"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/4233\/9409\/collections\/Timbren-logo-blue_254ff1c8-5835-4b97-9c8d-5479576a6ddd.png?v=1785578897","url":"https:\/\/parts2drive.com\/collections\/timbren.oembed","provider":"Parts2Drive","version":"1.0","type":"link"}