We can help you find the part you need
(888) 723-0041Diode Dynamics RGBW Multicolor Engine Bay LED Strip Kit (4-Piece)
Part #: DD0444
Diode Dynamics
Description
Diode Dynamics RGBW Engine Bay LED Strip Kit with four strips gives a full-size truck or SUV even, edge-to-edge color and a true white mode built in. Two strips can leave dark corners under a wide hood. Doubling up lets you trace both fender lines plus the cowl or radiator support, so the whole bay reads as one lit space instead of a couple of bright stripes. Since white runs on its own chip instead of being mixed from the color diodes, a tap on your phone swaps the show shade for clean, neutral light the moment you need to find a belt, hose or fuse box after dark. Working with a smaller bay or a tighter budget? Look at DD0440, the two-strip kit.
Features
- Four strips fill all four outputs on one DD3066 controller, so a single controller runs the entire kit
- Pair of long extension leads reaches the opposite fender or the radiator support from a controller mounted on one side of the bay
| Activation | Hood-mounted door pin switch (on when the hood opens) or red LED toggle switch |
| Amp Draw | 0.285 A per strip (at 13.2 V) |
| Color Channels | Red, green, blue and independent white (RGBW) |
| Connector | M8 barrel-style |
| Country of Origin | China |
| Cut Ends | Cutting breaks the IP67 seal at the cut; reseal the end, rejoin only by soldering |
| Cut Interval | Every 3 LEDs, about 2 in (5 cm) |
| In the Box | 4 x 19.7 in (50 cm) RGBW SMD30 strips, wiring harness, 3.3 ft (1 m) M8 extension, 2 x 9.8 ft (3 m) M8 extensions, DC-to-DT adapter, door pin switch, red LED toggle switch, 8 zip ties, 2 3M outdoor adhesive pads, 2 washers |
| Input Voltage | 9-16 V DC |
| IP Rating | IP67 weatherproof |
| LEDs | 30 SMD chips per strip |
| Measured Lumens | 310 lm per strip |
| Mounting | 3M outdoor adhesive backing or zip ties |
| Operating Temperature | -40°F to 185°F (-40°C to 85°C) |
| Shipping Weight | 1.79 lb (0.81 kg) |
| Strip Dimensions | 19.7 x 0.4 x 0.1 in (500 x 10 x 3 mm) |
| Strip Type | Flexible, cuttable |
| Warranty | 3-Year Limited Replacement |
| Watts | 3.5 W per strip |
| Wiring | Red power lead to battery positive, chassis ground; DC-to-DT adapter feeds the controller's Deutsch DT input |
| Product Condition | NEW |
* Disclaimer: Product information on this page is supplied by the manufacturer and may change without notice. Many parts fit specific vehicle makes, models, years and trims, so please confirm fitment before you buy. We work hard to present the most accurate data available, but Parts2Drive cannot guarantee the completeness or accuracy of manufacturer-provided content and is not responsible or liable for errors or omissions in it.