We can help you find the part you need
(888) 723-0041Baja Designs S2 SAE OEM Fog Light Replacement Kit for 2023-2026 Toyota Sequoia, Clear
Part #: 448163
Baja Designs
Description
Baja Designs S2 SAE OEM fog light replacement kit gives the 2023-2026 Toyota Sequoia four street-legal LED fog lamps in place of its factory units. A loaded Sequoia towing a camper through a mountain storm needs fog lights that actually cut through it. Each S2 SAE uses projector optics to lay down a low, broad pattern with a crisp upper edge, so the light stays on the pavement and the shoulders instead of glaring back off rain, snow or fog, and the people coming the other way aren't squinting. Meeting SAE J583 means they're legal to run in lousy weather on the interstate, not only off the pavement. Prefer a wider spread for trail use and don't need road legality? The S2 Sport version of this kit is part 448135.
Features
- Factory fog wiring triggers the kit through a plug-in pigtail, leaving the dashboard button in charge
- Power comes straight off the battery through a relay, so the factory fog circuit only sends the on signal
- Mounting brackets bolt where the stock fog lamps came out, with a pair of pods on each side
- Instructions include separate steps for the hybrid, whose accessory battery sits in the cargo area
| Amp Draw | 0.9 A per light; 3.6 A with all four on |
| Beam Pattern | SAE fog; wide beam with a sharp cutoff |
| Candela | 5,712 cd per light (measured) |
| Color Temperature | 5,000 K |
| Country of Origin | Made in USA |
| Installation | Lower bumper cover and factory fog lamps come off; no drilling or trimming |
| Lens | Clear |
| Light Dimensions (L x H x D) | 2.93 x 1.76 x 1.68 in (74 x 45 x 43 mm) per light |
| Light Output | 1,210 lumens per light; 4,840 lumens with all four on |
| Operation | Factory fog light switch |
| Optics | Aspheric projector |
| Package Dimensions | 12.00 x 12.00 x 8.00 in (305 x 305 x 203 mm) |
| Re-Torque | Check all fasteners after the first 100 miles (160 km) |
| Requires | Factory fog lamps (stock connector) |
| SAE Compliance | J583 front fog lamp |
| Shipping Weight | 2.5 lb (1.1 kg) |
| Tools Required | 9/16 in socket and wrench (plus a 10 mm wrench and 4 mm hex key), trim removal tool, Phillips screwdriver |
| uService | Not available; SAE lights are sealed and opening one voids the warranty |
| Warranty | Limited lifetime; repair by return to Baja Designs |
| Watts | 12.4 W per light; 49.7 W with all four on |
| Weight | 0.5 lb (0.2 kg) per light |
| What's Included | 4 S2 SAE fog lights, 2 vehicle-specific mounting brackets, relay wiring harness, 2 splitter harnesses, adapter harness, mounting hardware |
| 2023–2026 Toyota Sequoia | Requires factory fog lights. |
* Disclaimer: Product information on this page is supplied by the manufacturer and may change without notice. Many parts fit specific vehicle makes, models, years and trims, so please confirm fitment before you buy. We work hard to present the most accurate data available, but Parts2Drive cannot guarantee the completeness or accuracy of manufacturer-provided content and is not responsible or liable for errors or omissions in it.