We can help you find the part you need
(888) 723-0041RIGID Rear Chase Pod Light Kit for 2021-2026 Ford Bronco, Replaces Third Brake Light
Part #: 46727
Description
The RIGID rear chase pod light kit for the Ford Bronco swaps the factory third brake light on the spare for a RIGID Chase pod on 2021-2026 Broncos. On a dusty trail run, the driver behind you sees little more than a cloud. A brighter, bigger rear light mounted high on the spare gives the rig following you a clear signal through the dust when you slow down, and the red backlight makes the Bronco easy to spot in a convoy. It also cleans up the back of the truck, replacing the stock light with a purpose-built pod on a bracket made for this Bronco. Not for the Bronco Raptor. Lighting up the front as well? See the RIGID 46724 roof line light bar kit.
Features
- Wires into the Bronco's existing third brake light circuit through the supplied connector
- Mounts to the spare tire carrier using extended lug nuts in the two upper spare positions
- Bracket is built for the Bronco, so no drilling is needed
- Add a relay whenever the brake light circuit is rated below the pod's draw, per RIGID's instructions
- Because it ties into the brake light, RIGID suggests a professional do the install
| Amp Draw at 14V DC | 0.7 A |
| Backlight | Red |
| Beam Angle, Horizontal | 77.5° |
| Beam Angle, Vertical | 65.6° |
| Beam Distance at 0.25 Lux | 148 ft (45.1 m) |
| Beam Distance at 1 Lux | 74 ft (22.6 m) |
| Beam Pattern | Rear facing |
| Bracket Material | Stainless steel, UV- and abrasion-resistant powder coat |
| Illuminance at 32.8 ft (10 m) | 5.09 lux |
| Input Voltage | 9-36V DC |
| LEDs | 18 |
| Light Model | RIGID Chase pod |
| Mount Type | Spare tire carrier, replaces the factory third brake light |
| Peak Beam Intensity | 509 cd |
| Raw Lumens | 715 lm |
| Vehicle | 2021-2026 Ford Bronco (not Bronco Raptor) |
| Warranty | Limited Lifetime |
| Watts | 9.8 W |
| Weight | 2.3 lb (1.0 kg) |
| What's Included | RIGID Chase pod with red backlight, Bronco mounting bracket, mounting hardware, 6-pin connector, 2 extended lug nuts |
| 2021–2026 Ford Bronco | Position: Rear · Not for Bronco Raptor |
* Disclaimer: Product information on this page is supplied by the manufacturer and may change without notice. Many parts fit specific vehicle makes, models, years and trims, so please confirm fitment before you buy. We work hard to present the most accurate data available, but Parts2Drive cannot guarantee the completeness or accuracy of manufacturer-provided content and is not responsible or liable for errors or omissions in it.